无人智能技术在水库地形测量与库容计算中的应用     

张晨  牟乃夏  周霞  潘灶新  李海斌  庾鹏  杨骥 《测绘通报》2017,(11):72-76

随着无人机和无人船技术的发展,将其运用于水库地形测量已成为当今水利工程的发展趋势。本文采用无人机和无人船,以及不规则三角网的库容计算方法,对梅州水库的库容进行了复核,并阐述了相应的数据获取方法和数据处理过程,以及库容的计算方法和原理。无人机和无人船等新技术的使用,提高了水库地形的获取精度及库容的计算精度,不仅降低了成本,提高了效率,而且推动了水利科技的进步,具有实践意义。  相似文献   

稀少控制条件下无人机空三加密及在公路地形测图中的精度分析     

郑亮  王刊生 《测绘通报》2017,(11):139-143

针对无人机航空摄影测量地面控制点多的问题,介绍了一种无人机影像空中三角测量方法,基于动态精密单点定位,使用单台GNSS接收机获得高精度摄站点三维坐标,地面无需架设GNSS基站。通过平地、山地公路项目试验,分析了稀少控制条件下的控制点布设方法及空三加密精度,少量地面控制点即可满足1：2000比例尺地形图的精度要求,极大减少了内、外业工作量,简化了无人机航空摄影作业方式。  相似文献   

倾斜影像的量测方法研究     

王卿  吴晓明  刘力荣  李豪 《测绘与空间地理信息》2013,(9)

随着“数字地球”“数字城市”的提出,能够快速获取空间数据基础信息成为当今急需解决的问题之一。传统的航空摄影测量主要是对地物顶部信息的获取,而对侧面信息获取比较困难,因此倾斜航空测量技术成为国内外快速发展起来的一门高新技术。本文主要论述了基于倾斜影像量测的几种方法,并对以后量测方法的发展趋势进行了说明。  相似文献   

VirtuoZo全数字摄影测量工作站处理数码影像的生产应用     

李云涛  赵永铎  詹英  贾春中 《测绘与空间地理信息》2013,(12):233-235

全数字摄影测量主要应用于生产数字地形图及数字地面高程模型（DEM）和数字正射影像图（DOM）。某市及周边地区1：l000地形图航测项目,利用DMC一110摄影仪进行摄影获取的影像数据,使用VirtuoZo数字摄影测量工作站,阐述进行航测内业绘制地形图的全面流程。DMC技术将发挥更大的优势,在数字摄影测量中得到越来越广泛的应用。  相似文献   

Geomorphological monitoring of a highly dynamic estuary using oblique aerial photographs     

《International Journal of Digital Earth》2013,6(2):109-121

Abstract

Bad weather in many countries limits the use of optical satellite imageries in spatial and temporal monitoring of the environment. In this paper, a series of low-altitude oblique aerial photos taken on daily, weekly and monthly intervals were used to monitor the geomorphological changes in the upper part of the Mersey Estuary, northwestern England. This low-altitude aerial photo methodology reveals itself to be a satisfying compromise between cost, accuracy and difficulty of implementation. It offered a large amount of information on a spatial and temporal scale aiding in the understanding of channel mobility. This was an important consideration in the sitting and installation of new bridge pier foundations. This series of oblique aerial photos was used in a dynamic model to determine the migration of the ebb channel and was effective in identifying the main route of flow. Few uncertainties were encountered and the level of accuracy achieved in resolving these uncertainties in the images was in the range from 40 cm to a maximum of 1.7 m. This was compared with historical navigation charts and showed good correlation. Further applications are required to improve the quality of the data output from these images and the development of the technique.  相似文献   

Evidence for Early Miocene wrench faulting in the Marlborough Fault System,New Zealand: structural implications     

Jean-Christophe Audru  Jean Delteil 《Geodinamica Acta》2013,26(5):233-247

Abstract

In New Zealand, the Marlborough strike-slip faults link the Hikurangi subduction zone to the Alpine fault collision zone. Stratigraphic and structural analysis in the Marlborough region constrain the inception of the current strike-slip tectonics.

Six major Neogene basins are investigated. Their infill is composed of marine and freshwater sediments up to 3 km thick; they are characterised by coarse facies derived from the basins bounding relief, high sedimentation rates and asymmetric geometries. Proposed factors that controlled the basins generation are the initial geometry of the strike-slip faults and the progressive strike-slip motion. Two groups of basins are presented: the early Miocene (23 My) basins were generated under wrench tectonics above releasing-jogs between basement faults. The late Miocene (11 My) basins were initiated by halfgrabens tilted along straighter faults during a transtensive stage. Development of faults during Cretaceous to Oligocene times facilitated the following propagation of wrench tectonics. The Pliocene (5 My) to current increasing convergence has shortened the basins and distorted the Miocene array of faults. This study indicates that the Marlborough Fault System is an old feature that connected part of the Hikurangi margin to the Alpine fault since the subduction and collision initiation. © Elsevier, Paris  相似文献   

Optimizing Remote Sensing and GIS Tools for Mapping and Managing the Distribution of an Invasive Mangrove (Rhizophora mangle) on South Molokai,Hawaii   总被引：1，自引：0，他引：1  

Mimi D'iorio  Stacy D. Jupiter  Susan A. Cochran  Donald C. Potts 《Marine Geodesy》2013,36(1-2):125-144

In 1902, the Florida red mangrove, Rhizophora mangle L., was introduced to the island of Molokai, Hawaii, and has since colonized nearly 25% of the south coast shoreline. By classifying three kinds of remote sensing imagery, we compared abilities to detect invasive mangrove distributions and to discriminate mangroves from surrounding terrestrial vegetation. Using three analytical techniques, we compared mangrove mapping accuracy for various sensor-technique combinations. ANOVA of accuracy assessments demonstrated significant differences among techniques, but no significant differences among the three sensors. We summarize advantages and disadvantages of each sensor and technique for mapping mangrove distributions in tropical coastal environments.  相似文献   

UCX数码航摄在大比例尺3D产品生产中的应用     

魏瑞娟  曲海涛 《东北测绘》2012,(5):149-153

数码航摄技术在大比例尺3D产品开发中的应用日益广泛,UCX数码航摄系统成像分辨率较高,成为目前国内数字化测绘应用较多的主导设备。本文结合石狮工程实践,利用UCX数码航摄系统获取的影像数据生产制作3D数字产品,探讨了基于UCX数码航摄大比例尺3D产品的实现方法、技术路线、作业流程及全程质量控制。  相似文献   

“摄影与航空摄影”课程互动式教学模式的研究     

王鑫 《东北测绘》2012,(10):1-3

互动式教学模式以培养学生学习的自主意识和创新能力为目标,既发挥教师的主导作用,又充分体现学生的认知主体作用。摄影与航空摄影是遥感科学与技术专业的专业基础课程,本文提出了针对该课程的互动式教学模式,并进行了课堂教学实践,总结了该模式的创新点和应用价值。  相似文献   

基于断裂力学的特厚煤层综放开采顶板破断规律研究     

杨登峰  张凌凡  柴茂  李博  白翼飞 《岩土力学》2016,37(7):2033-2039

针对特厚煤层综放开采过程中矿压显现剧烈支架工作阻力难以确定的问题,结合特厚煤层工作面顶板岩层破断形成的悬臂梁-砌体梁力学结构模型。工作面来压阶段支架工作阻力不足时,引起砌体梁结构下沉使悬臂梁结构回转变形破断,造成上覆砌体梁结构滑落失稳压架使工作面矿压显现剧烈的特点,建立了含中心斜裂纹的悬臂梁结构破断的力学模型,应用断裂力学理论,分析了悬臂梁破断失稳的影响因素,推导了支架荷载的表达式。结果表明：裂纹倾角和长度是悬臂梁破断失稳的主要影响因素;支架荷载除与悬臂梁自身因素有关外,还与砌体梁垮落步距等因素相关。结合塔山煤矿8102综采工作面地质条件,计算了支架荷载的理论值,验证了理论分析的合理性。理论研究成果对于分析特厚煤层开采时的支架荷载的大小,合理选择支架减少顶板事故具有一定的工程实际意义。  相似文献